Knowledge Base

For answers to the most common questions, search the ITS Knowledge Base!

Back to ITS

Memorial 270: smart room instructions

M 270

Memorial 270 is a smart classroom that seats 31 people and is equipped with computers, a projector, sound system, document camera, Blu-ray DVD player, lecture capture system, and a touchscreen control system.

Using a laptop or the room PC
  1. Turn on the touch screen panel by pressing it anywhere.
  2. Press the Laptop button to show a laptop, or the Room PC button to show the PC in the instructor’s lectern.
  3. Connect the HDMI cable in the cable cubby in the lectern to the correct port on the laptop. There is a ring of adapters for various laptop and tablets connected to the HDMI cable.
  4. Power up the laptop. If the laptop display is not shown, configure the laptop to send output to a second display.
  5. Adjust the volume on the touch screen.
Using the Blu-ray DVD player
  1. Turn on the touch screen panel by pressing it anywhere. You may need to press harder than you think.
  2. Press the BluRay button to play a DVD.
  3. Insert the DVD you wish to show, and press play on the touch screen panel.
  4. Adjust the volume on the touch screen.
Using the document camera
  1. Turn on the touch screen panel by pressing it anywhere. You may need to press harder than you think.
  2. Press the document camera button on the touch panel.
  3. Turn on the document camera.
  4. Place the document or item to be shown on the bed of the document camera.
Using the microphone
  1. Press the power button on the side of the microphone to turn it on.
  2. Clip the microphone to your lapel or collar, pointing towards your mouth.
  3. Adjust the volume on the touch panel.
  4. Press the power button to mute the microphone. A red light will show that the microphone is muted.
  5. Press and hold the power button to turn the microphone off.
Turn off system
  1. Press the shut down button on the touch screen panel.
  2. Confirm or cancel the shutdown. The touch screen panel will go into sleep mode a few minutes after the system is shutdown.

Please see our KB articles for tutorials on using the touch screen control panel and the document camera.